首页 > > 详细

COMP 558程序语言辅导、辅导Matlab编程

COMP 558 Assignment 1

Posted: Thursday, Sept 23, 2021
Due: Thursday, Oct. 7, 2021 (by midnight, 11:59pm)
This assignment covers material up to Lecture 6. The questions concern basic image processing using
convolution, and some of core ideas of edge detection, and RANSAC.
Please use the mycourses discussion board forum for assignment 1, for any assignment related ques-
tions. This will help us reach the entire class when we respond. However, follow appropriate protocol,
e.g., do not reveal the answer to a particular question or ask if your proposed solution is correct. Save
these kinds of questions for one-on-one interactions during office hours. Do not post pictures of your
solutions because these could give ideas to the rest of the class. You are free to discuss the general as-
pects of questions with each other, but not to the point where you are revealing answers or sharing solu-
tions. This is an individual assignment and the solutions that you submit must reflect your own work and
must be written by you. You are not permitted to submit code or text that you have copied from one
another or from any third party sources, including internet sites. By submitting this assignment you
agree to abide by these rules.

Submit a single zipped file A1.zip to your mycourses Assignment 1 folder. The zip file must contain:
? A single PDF file with figures and text for each question. Please do not spend time with fancy
typesetting. Just make sure that your explanations are clear and that the figures and their captions
are easy to interpret and that you answer each part of each question.
The Matlab code that you wrote so that we can run it if necessary. Make sure that you name the
files as specified, in case the TAs wish to run your code using their own script.
Any images that you used to test your code, in case we need to run your code to reproduce your
In order to receive full points, your solution code must be properly commented, and you must provide a
clear and concise description of your computed results in the PDF. Note that the TAs have limited time
and will spend at most 20-30 minutes grading each submission.
Late assignment policy: Late assignments will be accepted up to only 3 days late and will be penalized
by 10% of the total marks, per day late. For example, an assignment that is submitted 2 days late and
that receives a grade of 90/100 would then receive an 18 point penalty. Submitting one minute after
midnight on the due date means it is 1 day late (not a fraction of a day), and same for the second day.
To examine the RGB values in an image, use the figure tab ToolsàDatatips. This will allow you to
click on pixels and see their values.
To speed up computation when testing code, resize the image (Matlab imresize).
Pay attention to the types of your data. You might need to use logical type (boolean), uint8, and
double. Matlab functions can be finicky and you may find you are spending much of your
debugging time on type errors. Another common error is to swap the x and y indices. If your
image is a 2D matrix, then you will index it with image(y, x) since matrices index row first and
column second. Also, since sometimes we will want to treat the centre of the matrix as the location
(0l,0), you might need to apply a shift in the (, ) coordinates for some of the steps below.
Make sure that you have the Computer Vision Toolbox and Image Processing Toolbox installed.
When you are working with “intensity” it is fine to convert an RGB image to a grayscale one, e.g.,
using rgb2gray
In Matlab think about how to vectorize computations and avoid loops if possible, e.g. = .
creates a matrix which is the element-wise multiplication of two matrices , that have
compatible sizes.

Question 1 Marr-Hildreth [20 points]
a) Consider a scalar function (, ) of two variables and , where and are variables that are
associated with two orthogonal directions. The Laplacian of is given by ? = !!"!#! + !!"!$!, where we
assume that is at least twice differentiable. Show that the Laplacian is rotation invariant, i.e., the
value of the expression does not depend on the actual choice of the orthogonal directions.
[Hint: Consider an arbitrary orientation , with a variable representing position on a line along that
orientation. Then compute ? using calculus and the chain rule, but using this line as one of the
chosen coordinate directions. To do this properly you need to introduce a change of coordinates.]
b) Edge detection in 2D is in general computationally expensive because a priori we do not know the
local orientation of an edge. Hence, one has to look for zero-crossings of a second directional
derivative, taken in multiple local directions. This is in fact how the mammalian visual system
implements a form of edge detection in particular layers of the visual cortex. In their paper on edge
detection Marr and Hildreth get around this complexity by associating edge locations with zero-
crossings of the non-directional (as in rotation invariant) operator, the Laplacian. They claim that
this operation picks out the direction which has highest slope of the zero-crossing (if one were to
take directional derivatives that is). However, they make an important assumption about the local
intensity profile. What is that assumption? Explain briefly how, if that assumption holds, their
argument works.
c) Given your answer in part b) when would you expect the Marr-Hildreth edge detection strategy to
give good results and when you would expect it to fail? You can draw on your intuition from a
natural image of a complex scene, which you could present and use to defend your argument. You
don’t have to implement the strategy, you just have to provide your reasoning.
Question 2 Edge detection Using Oriented Operators [40 points]

Write a script Q2_Edgedetection.m, using Matlab, to answer the following questions.
a) In class we’ve seen 1D Gaussian’s and their derivatives. Let be an integer variable that is
associated with the standard deviation of a 1D Gaussian. Create a 2D array with dimensions
(2 + 1) x (2 + 1). The centre of the array represents the (, ) position (0,0). Now populate the
entries at each row in the array with the value of the second derivatives of a 1D Gaussian in the direction, with standard deviation . The 1D Gaussian should have its peak value in the middle of
the row, and the values in each row should be identical. The original Gaussian should also be
normalized to have area equal to 1 underneath it, prior to the computation of the second derivative.
Show an image of this filter and show the colormap using the colorbar command. Also visualize
the filter values as a 2D height function, using Matlab’s surface plotting functions (e.g., surf,
surfc, mesh, etc.). As an example, if you had a 2D Gaussian and you computed its partial
derivatives in the and directions, a visualization of the results would look something like the
following. (Ofcourse, the filter you are designing in this question is not the same thing.)

b) Now modify the filter above, by multiplying its entries by a normalized 1D Gaussian in the direction, with standard deviation $, with $ > . This should have the effect of tapering the filter
values in the direction. Show an image of this modified filter and show the colormap using the
colorbar command. If you like you can also visualize it using Matlab’s surface plotting functions
(surf, surfc, mesh, etc.).
c) You will now write a routine to create a rotated version of the 2D filter in part b). The goal is to
rotate it by a small amount . An effective way of doing this is just to rotate the coordinates. In
other words, for the value at a coordinate (&, ′), in the destination 2D filter, where these
coordinates represent a rotation of (, ) about the origin, we simply copy the value from the
source 2D filter, at location (, ). Show images of this modified filter for different =0, 45, 90 135 , including the colormap using the colorbar command. Also visualize
the rotated filters as 2D height functions, as you did for part b).
d) We have provided an image of skyscrapers in Manhattan, viewed under perspective projection.
Filter this image with your filter from c), but using the 4 rotated copies of it (0,45,90 and 135
degrees). For each copy, find the pixels at which there is a zero crossing in either the or or
diagonal directions. Adjust your choice of so that you get acceptable results. Create a binary
image that indicates where these zero crossing points are. Note: you will actually have 4 sets of
zero-crossings, one for each orientation of the filter so you can think of a clever way of presenting
these results together. One idea could be to show each set of zero-crossings in a different colour
and then use the Matlab functions such as imfuse to create a composite image. Alternatively, you
can use different colours for each filter orientation. You just have to explain your visualization.
For this part you have some flexibility in how you choose to display your results. You might need to
tune your parameters , $ . Do not use for loops to find the zero crossings. Instead, use
vectorization. Hint: You want to compare neighboring pixels of the filtered image and see where
the values have different sign, namely if their product is negative. To avoid the annoyances of
image boundaries, use Matlab’s circshift operation to compare an image to a shifted version of
itself. Note that logical operations can also be vectorized.
e) Repeat (d) but this time use a Laplacian of a Gaussian filter with = 6 and width 40. To construct
this filter you can directly use the Matlab function fspecial. Briefly discuss how your results in
e) compare with the results in d), using also your insights from question 1.
Question 3 Line finding using RANSAC [40 points]

For this question, you should use the Manhattan skyscraper image. You can also use an additional image
for illustrative purposes if you like, but make sure that it contains a certain distribution of long linear
structures. Don’t forget to submit this image as well.
a) Your task is to implement the RANSAC method to find prominent lines in your input image. The
pseudo-code for the RANSAC algorithm is in the slides and lecture notes provided in lecture 6, and it
is presented in slightly simplified form here. In this simplified form, initially we are not using least
squares to refine a fit, and we are not finding the `best’ model.
Repeat M times{
Randomly sample an edge element a list of N edge elements;
Examine all remaining (N-1) edge elements and count
the number C that are within some threshold distance
from the line associated with the edge element, and
whose orientation is within ? degrees of the orienta-
tion of the edge element.(This is the ‘consensus set’
for that line model.);

If C is sufficiently large (greater than ), then
use the average location of all these edge elements,
and the average orientation, to produce a new line
model. Store this line model. Remove the edge elements
in the present consensus set from further considera-
tion, i.e., mark them as ‘used’.;

You are given a script makeEdgeList.m (starter code) that reads in an image and generates a
list of image edges. For your convenience it generates a list of 4-tuples, namely (' , ' ,' , ' ), where (' , ' ) points in the gradient direction. This code uses Matlab’s
Canny edge detector and Matlab’s image gradient estimator.
Write and submit a script Q3_Ransac.m that does the following. It first reads an image and then
computes the edges, using the script above. It then implements the pseudocode above, to return a
set of line models, given a choice of values for , ? and Cmin and the number of times M you
chose to repeat the loop.
When you are done you will have a certain number of line models. Superimpose these line models
by drawing the associated lines on the original image in a chosen colour. They should coincide with
linear features in the image. By playing with Cmin you should be able to control the number of line
segments found.
Present and discuss your results and the effect of the parameter choices.
Do not use any public domain implementations of the RANSAC algorithm since we want you to write
your own!
b) [Attempt this part only once you have a solution to part a), since this part carries only a little weight].
Modify your solution in part a) slightly as follows. Rather than using the average position and
orientation to return a line model, produce one via a least squares fit to the (, ) data points in the
consensus set. To implement least squares fitting you can use built in Matlab functions for
eigenvector/eigenvalue computation. The difference now will be that your line models will involve
actual fits to the data points, and each line model will come with an error of fit. Discuss your results.
Get started early! Good luck, and have fun!

  • QQ:99515681
  • 邮箱:99515681@qq.com
  • 工作时间:8:00-21:00
  • 微信:codinghelp2

联系我们 - QQ: 99515681 微信:codinghelp2
© 2021 www.7daixie.com