CS-350辅导、C++编程语言讲解

CS-350 - Fundamentals of Computing Systems
Homework Assignment #8 - BUILD
Due on November 14, 2024 — Late deadline: November 16, 2024 EoD at 11:59 pm
Prof. Renato Mancuso
Renato Mancuso
1CS-350 - Fundamentals of Computing Systems::Homework Assignment #8 - BUILD Problem 1
BUILD Problem 1
We now have a server capable of performing non-trivial operations on images! All we have to do now is to
make the server multi-threaded. And yes, we already have the infrastructure to spawn multiple threads. So
what’s missing exactly?
Output File: server_mimg.c
Overview. As mentioned above, the main idea is to allow multple workers to perform operations on images
in parallel. Everything you have developed in BUILD 6 will be reused, but we must make sure that when
multiple worker threads are spawned, the correctness of the operations on the images is still guaranteed.
But what could be jeopardizing the correctness of these operations? Let us consider a concrete case. Imaging
the following sequence of requests queued at the server: (1) Retrieve image A, (2) blur image A, (3) detect
the vertical edges of image A, and (4) send back the result of the operations performed on image A.
With only one worker, the operations are carried out in this sequence and the result sent back to the client is
an image with the cumulative operations (2) and (3) correctly applied to the source image. With 2 workers
(unless we ffx our implementation) we could have worker #1 and #2 working in parallel on operations (1)
and (2) with the result of the operations being some weird mix of the two operations.
In this assignment, the goal is to allow safe multi-threading where the semantics of sequential operations on
the images is preserved even if multiple threads are spawned and operate in parallel. For this task, we will
use semaphores to perform inter-thread synchronization.
Design. One of the main problem that we have to solve is un-arbitrated access to shared data structures.
To verify that there is a problem unless we insert synchronization primitives accordingly, start with your (or
my) solution for HW6, rename it appropriately, and enable spawning more than 1 worker threads.
Then, run the following simple experiment. First, run the client to generate the sequence of operations listed
above with 1 worker thread and look carefully at the output report generated by the client:
./server_mimg -q 100 -w 1 2222 & ./client -I images/ -L 1:R:1:0,0:b:1:0,0:v:1:0,0:T:1:0 2222
You will notice that the ffrst hash reported by the client (9f3363f0249c15163d52e60fd9544c31) is simply
the hash of the original test1.bmp image. The second (and last) hash reported by the client is the hash
(00e4fc4b9c7c71ee2ca3946053f78793) of the blur+vertical edge detection operations applied in sequence
to the image. However, if we increase the number of worker to 2, the ffnal hash will be different! For instance,
when running:
./server_mimg -q 100 -w 2 2222 & ./client -I images/ -L 1:R:1:0,0:b:1:0,0:v:1:0,0:T:1:0 2222
The last hash obtained on the reference machine changes to b5932c2bcb0a64121def911286c706e2, but
might be something else entirely on a different machine. Also in some cases, the server crashes entirely.
To solve the problem, the cleanest way is to introduce semaphore-based synchronization between threads.
In order to deffne a semaphore, you should use the type sem_t deffned in semaphore.h. Before a semaphore
can be used, it must be initialized.
This can be done with the sem_init(sem_t * semaphore, int pshared, unsigned int init_value).
Here, semaphore is pointer to the semaphore to be initialized, pshared can be set to 0, and init_value is
a non-negative initialization value of the semaphore, following the semantics we have covered in class.
Once your semaphore has been correctly initialized (make sure to check for the error value of the sem_init(...)
call!), the wait and signal operations can be performed over it, following the semantics we have discussed
Problem 1 continued on next page. . . 2CS-350 - Fundamentals of Computing Systems::Homework Assignment #8 - BUILD Problem 1 (continued)
in class. To wait on a semaphore, you must use the sem_wait(sem_t * semaphore) call; to signal on a
semaphore, you must use the sem_post(sem_t * semaphore).
Shared Data Structures. Of course, the main question is what data structures must be protected?. Here
is a list of things that can be problematic, but your own implementation could be different, so try to map
the statement below to your own code.
(1) Image Objects: One obvious place to start is to protect the image objects that are registered with
the server and upon which operations are requested by the client. We want to prevent different worker
to simultaneously change the content of an image, so a good idea is to introduce one semaphore per each
registered image! These must be created and/or initialized dynamically at image registration time.
(2) Image Registration Array: Another shared data structure is the global array of registered images.
Concurrent operations over that array is not a good idea, so all the threads will need to synchronize when
trying to access that shared data structure.
(3) Connection Socket: What? The connection socket has always been shared, so why is that a problem
now? The truth is that it has always been a problem, but we did not care because the responses from
the workers to the client were always a one-shot send(...) operation. But now, there are cases where the
server follows a two-step approach in the protocol it follows with the client. For instance, when handling an
IMG_RETRIEVE operation, a worker ffrst provides a positive acknowledgment of completed request and then
the payload of the image being retrieved. What if another worker starts sending other data while a retrieve
operation is in progress? Careful: the same goes for the parent when handling IMG_REGISTER operations.
(4) Request Queue and STDOUT Console: We already know that the shared request queue and the
shared STDOUT console require the use of semaphores to ensure correctness. Perhaps take inspiration from
the use of semaphores in those cases to handle the other shared data structures listed above.
Desired Output. The expected server output is pretty much what you already constructed in HW6. Here
is it summarized again for reference. You should print queue status dumps, rejection and completion notices.
Queue status dumps and rejection notice are identical in format to HW5 and HW6. Once again, the queue
dump status is printed when any of the worker threads completes processing of any of the requests.
Just like HW6, when a request successfully completes service, the thread ID of the worker thread that has
completed the request will need to be added at the beginning of the line following the format below. You can
assign thread ID = (number of workers + 1) to the parent thread. If multiple worker threads are available to
process a pending request, any one of them (but only at most one!) can begin processing the next request.
T R:,,,,,,
,
Here, is a string representing the requested operation over an image. For instance, if the operation
was IMG_REGISTER, then the server should output the string “IMG REGISTER” (no quotes) for this ffeld.
should just be 0 or 1, depending on what the client requested. should be
the image ID for which the client has requested an operation. If the server is ignoring any of these values
in the response, set these ffelds to 0. Finally, should report the image ID on which the
server has performed the operation requested by the client. Recall that this might be different from what
sent by the client if overwrite = 0 in the client’s request, but it must be the same if overwrite = 1.
Additional Help. You might have noticed, from the commands recommended above, that the client (v4.2)
now allows you to deffne a script of image operation requests. This is useful to test the correctness of your
server under a controlled workload.
To use this feature, you should still provide the path to the folder containing the test images using the
-I parameter. Next, you should also provide the -L
parameter, where the is a comma-separated list of image operations with the
following format:
Problem 1 continued on next page. . . 3CS-350 - Fundamentals of Computing Systems::Homework Assignment #8 - BUILD Problem 1 (continued)
:::.
Here, is a number of seconds that will elapse between this and the next operation
in the script.
Next, is a single case-sensitive (!!) letter that identiffes which operation to be performed
(see list below).
• R: IMG_REGISTER
• r: IMG_ROT90CLKW
• b: IMG_BLUR
• s: IMG_SHARPEN
• v: IMG_VERTEDGES
• h: IMG_HORIZEDGES
• T: IMG_RETRIEVE
The ffeld should always be set to 1 (for simplicity we do not handle cases with overwrite = 0).
Finally, the should be the ID on which the operation should be performed. This ffeld has a
special meaning in the case of IMG_REGISTER operations. Only in this case, it tells the client which one of
the ffles scanned in the images folder should be registered with the server. In all the other cases, an ID = n
tells the client to request the operation on the n
th
image that it has registered with the server.
When a script is requested at the client, the client will conveniently report how it has understood the script.
For instance, when using the script:
1:R:1:2,2:b:1:0,0:T:1:0
the client will report:
[#CLIENT#] INFO: Reading BMP 0: test1.bmp | HASH = 9f3363f0249c15163d52e60fd9544c31
[#CLIENT#] INFO: Reading BMP 1: test2.bmp | HASH = b6770726558da9722136ce84f12bfac8
[#CLIENT#] INFO: Reading BMP 2: test3.bmp | HASH = f2ac174476fb2be614e8ab1ae10e82f0
[#CLIENT#] INFO: Reading BMP 3: test4.bmp | HASH = 0caaef67aee1775ffca8eda02bd85f25
[#CLIENT#] INFO: Reading BMP 4: test5.bmp | HASH = 5597b44eaee51bd81292d711c86a3380
[#CLIENT#] INFO: Reading BMP 5: test6.bmp | HASH = 11552ac97535bd4433891b63ed1dd45d
[#CLIENT#] Next Req.: +1.000000000 - OP = IMG_REGISTER, OW = 1, ID = 0
[#CLIENT#] Next Req.: +2.000000000 - OP = IMG_BLUR, OW = 1, ID = 0
[#CLIENT#] Next Req.: +0.000000000 - OP = IMG_RETRIEVE, OW = 1, ID = 0
4CS-350 - Fundamentals of Computing Systems::Homework Assignment #8 - BUILD Problem 2
Submission Instructions: in order to submit the code produced as part of the solution for this homework
assignment, please follow the instructions below.
You should submit your solution in the form of C source code. To submit your code, place all the .c
and .h ffles inside a compressed folder named hw8.zip. Make sure they compile and run correctly according
to the provided instructions. The ffrst round of grading will be done by running your code.
Use CodeBuddy to submit the entire hw8.zip archive at https://cs-people.bu.edu/rmancuso/courses/
cs350-fa24/codebuddy.php?hw=hw8. You can submit your homework multiple times until the deadline.
Only your most recently updated version will be graded. You will be given instructions on Piazza on how
to interpret the feedback on the correctness of your code before the deadline.
5

CS-350辅导 、C++编程语言讲解

CS-350辅导、C++编程语言讲解